Violin & Viola Endpin Jack
For Violin & Viola Builders and Luthiers.
Technical
This is an endpin jack with a standard 30:1 violin taper. The diameter at the narrow part of the taper is 8.75mm. The diameter at the top of the taper is 9.25mm. It may be necessary to use a standard violin peg hole reamer to open up the existing endpin hole to fit this jack.
The endpin jack has a shielded 1/8" Switchcraft stereo jack built into it. This jack may be used for either stereo or mono output depending upon requirement.
An optional 1/8" to 1/4" adapter is available and an optional 1/8" to 1/4" ten foot shielded cable is as well.
- Product
- Technical
Product
For Violin & Viola Builders and Luthiers.
Technical
This is an endpin jack with a standard 30:1 violin taper. The diameter at the narrow part of the taper is 8.75mm. The diameter at the top of the taper is 9.25mm. It may be necessary to use a standard violin peg hole reamer to open up the existing endpin hole to fit this jack.
The endpin jack has a shielded 1/8" Switchcraft stereo jack built into it. This jack may be used for either stereo or mono output depending upon requirement.
An optional 1/8" to 1/4" adapter is available and an optional 1/8" to 1/4" ten foot shielded cable is as well.