Products

Replacement Posts For Bobbin Holder (4 pcs).

Poly/Nylon - 'Modern' Coil Wire - 1/2 lb Spool This is the type of coil wire used for most of the pickups being built at this time. The copper wire...

PE Plain Enamel - 'Vintage' Coil Wire - 1/2 lb Spool This is the type of coil wire used on most vintage pickups. The copper wire has a single build...

Poly/Nylon - 'Modern' Coil Wire - 1/2 lb Spool This is the type of coil wire used for most of the pickups being built at this time. The copper wire...

PE Plain Enamel - 'Vintage' Coil Wire - 1/2 lb Spool This is the type of coil wire used on most vintage pickups. The copper wire has a single build...

Poly/Nylon - 'Modern' Coil Wire - 1/2 lb Spool This is the type of coil wire used for most of the pickups being built at this time. The copper wire...

     The new AD-02 is a powerful, low profile pickup that was specifically designed for the autoharp. The sensor fits under the strings on most aut...

 Artist Endpin Jack Preamps are two channel preamps that can run from either an onboard 9 volt battery or from phantom power of up to 48 volts. Hav...

The Artist Endpin Jack Preamp features two discrete channels and the ability to  run from phantom power or a 9 volt battery. Having 2 separate chan...

The Artist Endpin Jack Preamp features two discrete channels and the ability to be run from phantom power or a 9 volt battery. This model comes wit...

The Automatic Winder Traverse is a small programmable machine that makes winding pickup coils easier and more consistent. It removes most of the dr...

The Automatic Winder Traverse is a small programmable machine that makes winding pickup coils easier and more consistent. It removes most of the dr...

This optional bracket allows the fitting of the output jack on passive RB-1 and RB-2 pickups to the back side of a bass tailpiece. It provides the ...

Battery bag with self adhesive velcro. Holds a standard 9 volt battery.

BB-03 - Plug In Volume Control      This "Black Box" is a small lightweight passive volume control unit that simply plugs right into the endpin jac...

BB-04 - Plug In Volume Control      This "Black Box" is a small lightweight 2 channel passive volume control unit that simply plugs right into the ...

This basic BJ-02 comes with a simple metal jack assembly and installs in minutes. The light weight BJ-02 sensor does not interfere in any way with ...

The BJ-02 Pro has an ABS jack assembly that provides a volume control right at your fingertips. What could be easier?  The jack assembly clamps to ...

The BJ-02 Std. comes with an attractive walnut output jack assembly. The jack assembly clamps to tensioning hooks of the banjo, and installs in the...

The BJ-02M provides our BJ-02 sensor, jack assembly, a powered condenser microphone, cable, and our 2 channel Mini Pre 2 belt clip preamp.      Wha...

The BJ-02M Upgrade Kit provides our simple metal jack assembly, M microphone, cable, and 2 channel Mini Pre 2 belt clip preamp. This kit can be use...

This pickup system allows you to add a pickup to your instrument without having to change the bridge or modify anything . The BM-1 was designed wit...

This pickup system allows you to add a pickup to your instrument without having to change the bridge or modify anything . The BM-1 Neo was designed...

For fixed, non-adjustable bridges on Bouzouki, Mandola, and Mandolin. This system allows you to add a pickup to your instrument without having to c...

The New Book Of Standard Wiring Diagrams is a compendium of Volumes I and II which were released in 1992 and 1997 respectively. This straight forwa...

A pickup system when you need it. The C-12 Std installs in about 3 minutes and was designed to allow you to install and remove it quickly and easil...

The CH-1 is designed for use on smaller bodied Celtic harps having 28 strings or less. It provides a very simple solution to the problem of quickly...

First introduced in April 2006 and having undergone a series of continuous improvements over the years, our CH-3 Artist pickup system will work fla...

110 volt ac to 9 volt dc, 500 milliamp, center positive power supply.

90 to 260 volt ac to 9 volt dc, 500 milliamp, center positive power supply.  Comes with adapter plugs for AU, UK, EU, US (not all plugs shown in ph...

110 volt AC to 12 volt DC, 1 amp, center positive power supply

90 to 260 volt ac to 12 volt dc, 1 amp, center positive power supply.  Comes with adapter plugs for AU, UK, EU, US (not all plugs shown in photo be...

          Model B winding machine kits are designed to wind coil wire from 38 gauge to 44 gauge or finer. It is a small profile machine fully capab...

           Model B winding machine kits are designed to wind coil wire from 38 gauge to 44 gauge or finer. It is a small profile machine fully capa...

       Model D winding machines are designed to wind with coil wire from 30 gauge to 44 gauge or finer. The Model D was designed and is built as a ...

         Model D winding machines are designed to wind with coil wire from 30 gauge to 44 gauge or finer. The Model D was designed and is built as ...

Control Kit-1 for the MicroPre and MicroPre-M contains: 2 500k audio taper pots, 1 .047uf capacitor, 1 1/4" output jack, 1 6" 9volt battery snap, 1...

Control Kit-2 for the MicroPre 2 and MicroPre-2M contains: 3 500k audio taper pots, 1 .047uf capacitor,  1  1/4" output jack, 1 6" 9volt battery sn...

New CV Violin Pickup - Simply Slides Into Place On A Violin Bridge ....when you need a pickup some of the time or all of the time..... The new CV p...

The D-4 Std dulcimer pickup is an outstanding pickup that combines great sound with simple and quick installation......and best of all, for most in...

The Dualie is small, surface mounted pickup designed for use on medium sized soundboards. The Dualie Insider comes complete and ready to install an...

The Dualie is a small, surface mounted pickup designed for use on medium sized soundboards. The Dualie Outsider comes complete and ready to use wit...

     We've put a kit together for converting the electronics and motor from what  was used for the older model ECW winders to our current Model B. ...

Take apart endpin jack, stereo configuration: 3 contacts plus chassis ground. As used with many of our passive pickups and all of our endpin jack p...